ParrotTalk

March 1, 2011

The Secret of the Cruse? One Word. Lighting.

Filed under: Uncategorized — admin @ 11:41 am

There’s one simple reason why the Cruse Camera is better than anything else.  It’s the lighting.

If you have some experience with copy and repro photography, some of this may be old hat, but bear with me.  I guarantee a “Eureka!” moment.  If this is new, then hopefully it’s helpful in understanding some of the basic principles of reproducing flat art.

Let’s start with how it’s done traditionally.  Here’s a top-of-the-line repro copy stand with a standard four-light array.

If you’re following along at home, the formula is this: Each light is 45º off the axis of the table, measured from the center.  Each light is the same distance from the center point of the table.  Here’s a secret of getting balanced lighting- you aim each light at the far side of the table. This helps overcome the Inverse Square Law.

Oh, snap.  Math.  Well, simply put, the Inverse Square Law is a basic law of Physics, and without all the math it means that your light falls off really fast as you move further away from it.  It’s drops faster than just the distance, that is, moving something twice as far away cuts the light not by half, but by four times…  that is, the light at twice the distance is 1/4 the intensity.  Note the arrows, and the distance of the table from each light.  See the problem? Even from this rough diagram, the distance from one light to the far side is more than twice the distance to the near side of the table. There’s a ton of difference in the resulting luminance.

Here’s a basic diagram of a traditional copy setup, from the camera’s eye.

That’s the table where the art is going to sit, and those four blocks are the lights.  Now.  Because of the Laws of Physics, here’s what the lighting pattern is going to look like…  exaggerated for the sake of clarity, but nonetheless, this is what we’re fighting.

It really doesn’t matter what you do, at some level you’re going to be dealing with the basic Laws of Physics.  I know.  I don’t like Physics either.

Let’s take a look at the Cruse system and see how it’s different.

Here’s the lighting array, with the two strip lights centered on the sample area- literally only inches wide.

Here’s what the lighting pattern looks like:

…getting the idea here?  You have a completely even lighting pattern from one side of the piece to the other, but, more importantly, because the lights are so close and the sample area is so narrow, the intensity of the light is perfectly even.  The issue of the distance of the light from the subject no longer matters, since it’s virtually the same from one side of the sample area to the other.  This is called using Math for Good…  not for Evil.

Here are three shots simulating the Cruse making a scan.

And…  the final scan simulating the lighting:

See what we’re talking about?  Dead-even light from side to side, from top to bottom, without any sort of tricks, plugins or workarounds.

Here’s the cool part.  This demonstrates how the Cruse system works when you’re trying to light something as “Left-Right Even” lighting.  Now, suppose that you want to have a little side-shadow to show the depth of a piece, say…  a painting with a brush stroke?  With a conventional copy stand, that means you kill one side of your lighting, and your even-lighting problems just went ballistic.  Even if you use some very advanced lighting workarounds or software to even the field of the capture, your shadow quality is going to be different from one side of the piece to the other.  Where you’re closer to the light, the shadow will be softer.  Where you’re further away, the shadow will be sharper.  There is simply no way to achieve a true, even sidelight with conventional copy/repro lighting.  There’s no bending of the rules of Physics.

Here’s what the pattern is going to look like with one bank turned off:

Here’s what the Cruse pattern looks like with “Left Textured” lighting, that is, with the right bank turned off:

On the Cruse, once again, the effects of distance from the light source are virtually non-existent.  You want side-lighting?  You got it, from a simple side-light to up to 10cm off-axis, and perfectly even intensity from one side to the other.  You’re not fighting the light, or Physics.  You’re working with the light.

Here’s what that looks like.  This is a top-lit painting, sampled from the very bottom:

Here’s the same scan, sampled from the very top:

With conventional lighting, the top sample would be getting about 200% more light intensity…  here you can see the two areas are being lit precisely the same.  Not only that, the shadow quality, that is, the softness and feel of the shadows are identical.  Game over.

There are very few digital systems out there that anyone can claim are clearly unique…  but the Cruse Camera is one of them.  Next time someone tells you they have the best quality digital reproduction setup, just ask one question.  “Is it a Cruse?”  For more information and a look at what the machine can do, check out our Cruse videos and see the machine in action.

-Ted Dillard

No Comments »

No comments yet.

RSS feed for comments on this post. TrackBack URL

Leave a comment

*

Powered by WordPress